Basket Empty

01992 523332

  • Home

Use of Torches

General uses of torches

Some of the uses of a Bullfinch torch are:

  • Soft and silver soldering
  • Central heating installation - capillary joints
  • General plumbing work
  • Factory maintenance work
  • Public utility work
  • Telecom work
  • Electrical work
  • Gas installation
  • Tube bending
  • Paint stripping
  • Modelling
  • Jewellery work
  • Glass bead making
  • DIY work
  • Electrical work with soldering attachment
  • Plastic tile laying
  • Heat shrinking of sleeves and plastics - e.g. cable jointing for Telecom and electrical installations
  • General household jobs
  • Removal of fungal growth from beehives
  • Other agricultural uses such as removal of feathers from bird carcasses
  • Pottery kilns - see below
  • Blacksmiths forges

And for larger burners in Standard blowtorch range:

  • Bitumastic work
  • Roof laying
  • Torch-on roofing
  • Weed burning
  • Large pipe work - e.g. weld pre-heating

Uses of Autotorch brazing system

In addition to the uses shown which these brazing burners will usually do faster, the brazing system is ideal for silver soldering of copper pipes and as a portable bronze brazing system for the following areas of work:

  • Maintenance
  • Jewellery
  • Refrigeration
  • Steam fittings installation
  • Model engineering
  • Heating and ventilating
  • Agricultural machinery maintenance
  • General engineering repair
  • Appliance repair
  • Lighting barbecues
  • Lighting braziers, coal and coke fires
  • Technoweld aluminium brazing

The Autotorch acetylene system

Has improved performance over the Autotorch brazing system and is particularly good for Bronze brazing and Technoweld work.

Kilns

Bullfinch standard burners can be used for providing the burners for kilns. Most kilns have different requirements and so it is hard to give specific advice. We do have an informal information sheet on how our burners may be set up for a kiln - see downloads section. It is important to remember that the burners do require space round them to allow air to be drawn in for combustion at the front and the back of the burners.

Product Consultation

Extra Catalogue
randl-link-pic

Spares and repairs

Contact Details

T: 0121 765 2000

E: This email address is being protected from spambots. You need JavaScript enabled to view it.

Contact Us Information

Basket Empty